UAP 158 - The Challenge Mac OS

UAP 158 - The Challenge Mac OS

See Full List On Dl.ubnt.com
Uap 158 - The Challenge Mac Os Download
802.11ac Dual-Radio Long Range Access Point
Place the UAP‑IW in the wall box and properly position the cable to ensure the Ethernet connection is not strained. Note: If the wall box does not have enough room to accommodate the UAP-IW without straining the Ethernet connection, replace the wall box with an open‑end or deeper box. UAP-nanoHD UAP-AC-M-PRO UAP-AC-HD LAN WAN UniFi Cloud Key (UniFi Controller) Remote Access to UniFi Controller DOWNLOAD THROUGHPUT & LATENCY DEVICES ON 2.4 GHZ CHANNEL DEVICES ON 5 GHZ CHANNEL UPLOAD THROUGHPUT & LATENCY LATENCY THROUGHPUT SPEED TEST msec Mbps 7 0.94 1 2.33 25 22 7 59 0.9 116 0200+ 700+ 0.01 413 0.2 229 2 118 54 ACTIVE DEVICE.
Mounting Bracket
See Full List On Dl.ubnt.comFlat Head Screws (Qty. 3)
Screws (Qty. 3)
Uap 158 - The Challenge Mac Os DownloadPoE Adapter (24V, 0.5A) with Mounting Bracket
Installation RequirementsCAT5/6 cable
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
System RequirementsLinux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11
UniFi Controller software v5.x or newer, available at: ui.com/download/unifi
LEDPortsEthernet
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following:
Included PoE Adapter
Ubiquiti UniFi Switch with PoE
Ubiquiti TOUGHSwitch™ PRO
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds until the LED turns off.
Locking Clip
During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.
Mounting Bracket
This bracket is used for wall or ceiling mounting.
Wall MountOptional
Note: If the Ethernet cable feeds along the mounting surface, then remove the Cable Feed Plug on the side of the UniFi AP instead.
Ceiling MountNote: The UAP/UAP-LR uses 24V passive PoE. PoE must be manually enabled on the switch. 
OR
UAP/UAP-LR
A safe space mac os. Dimensions
200 x 200 x 36.5 mm
(7.87 x 7.87 x 1.44')
Weight
290 g (10.23 oz)
with Mounting Kit430 g (15.17 oz)
Networking Interface
(1) 10/100 Ethernet Ports
Buttons
Reset
Power Method
Passive Power over Ethernet (12-24V)
Power Supply
24V, 0.5A PoE Adapter (Included)
Power Save
Supported
Operating Frequency 
UAP2.4 GHz
UAP-LR2.4 GHz
Max. Power Consumption
UAP4W
UAP-LR6W
Max. TX Power
UAP20 dBm
UAP-LR27 dBm
2d action shooter mac os. Antenna
Integrated Omni
Antenna Gain
4 dBi
Wi-Fi Standards
802.11 b/g/n (2.4 GHz)
Wireless Security
WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID
Up to Four per Radio
Mounting
Ceiling/Wall (Kits Included)
Operating Temperature
-10 to 70° C (14 to 158° F)
Operating Humidity
5 - 80% Noncondensing
Certifications
CE, FCC, IC
Mounting Bracket
Flat Head Screws (Qty. 4) 
Screws (Qty. 4) 
Cable Feed Plug 
Power Cord*
* Included only in the single-pack of the UAP-AC-PRO
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
Cat5/6 UTP cable for indoor installations
IMPORTANT: The UAP-AC-PRO requires the UniFi Controller v5.4 or higher, available at: ui.com/download/unifi
Outdoor Installation RequirementsIMPORTANT: The UAP-AC-PRO may be installed outdoors under an eave or other protected location. Do not install the UniFi AP in an open environment.
Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling.
Cable feed opening must be directed away from the open environment.
Cable feed must be pointed downwards when wall-mounted.
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
System RequirementsLinux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
LEDPortsSecurity Slot
If you need to remove the UniFi AP from the Mounting Plate, insert a flat, thin object like a zip tie or large paper clip in the Security Slot to release the Lock Tab and turn the UniFi AP counterclockwise.
Secondary
The Secondary port is a Gigabit Ethernet port used for bridging.
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. 
USB
The USB port is reserved for future use.
Main
The Main port is a Gigabit Ethernet port used to connect the power and should be connected to the LAN and DHCP server.
The UniFi AP can be mounted on the wall or ceiling. Perform the steps for the appropriate installation:
Wall Mount

Ethernet
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following: Included PoE Adapter Ubiquiti UniFi Switch with PoE Ubiquiti TOUGHSwitch™ PRO
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds until the LED turns off.
Locking Clip
During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.
Mounting Bracket
This bracket is used for wall or ceiling mounting.

UAP/UAP-LR
A safe space mac os. Dimensions	200 x 200 x 36.5 mm (7.87 x 7.87 x 1.44')
Weight	290 g (10.23 oz)
with Mounting Kit	430 g (15.17 oz)
Networking Interface	(1) 10/100 Ethernet Ports
Buttons	Reset
Power Method	Passive Power over Ethernet (12-24V)
Power Supply	24V, 0.5A PoE Adapter (Included)
Power Save	Supported
Operating Frequency
UAP	2.4 GHz
UAP-LR	2.4 GHz
Max. Power Consumption
UAP	4W
UAP-LR	6W
Max. TX Power
UAP	20 dBm
UAP-LR	27 dBm
2d action shooter mac os. Antenna	Integrated Omni
Antenna Gain	4 dBi
Wi-Fi Standards	802.11 b/g/n (2.4 GHz)
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Ceiling/Wall (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 - 80% Noncondensing
Certifications	CE, FCC, IC

Security Slot
If you need to remove the UniFi AP from the Mounting Plate, insert a flat, thin object like a zip tie or large paper clip in the Security Slot to release the Lock Tab and turn the UniFi AP counterclockwise.
Secondary
The Secondary port is a Gigabit Ethernet port used for bridging.
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.
USB
The USB port is reserved for future use.
Main
The Main port is a Gigabit Ethernet port used to connect the power and should be connected to the LAN and DHCP server.

Optional
Ceiling MountThe UAP-AC-PRO features auto-sensing 802.3af/802.3at PoE support and can be powered by any of the following:
802.11ac Dual-Radio Long Range Access PointUbiquiti UniFi Switch with PoE
802.3af/802.3at PoE+ compliant switch
Ubiquiti Gigabit PoE Adapter (48V, 0.3A)
The single-pack of the UAP-AC-PRO includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.
Connecting to a PoE SwitchConnect the Ethernet cable from the UniFi AP directly to a PoE port on the switch. 
UAP-AC-PRO
Dimensions
196.7 x196.7 x 35 mm
(7.74 x 7.74 x 1.38')
Weight
with Mounting Kit
350 g (12.35 oz)
450 g (15.87 oz)
Ping (itch) (jeremyfischer) mac os. Networking Interface
(2) 10/100/1000 Ethernet Ports
Buttons
Reset
Power Method
PoE 802.3af/802.3at
Power Supply
48V, 0.3A Gigabit PoE Adapter*
Max. Power Consumption
9W
Operating Frequency
2.4 GHz
5 GHz
Max. TX Power
2.4 GHz
5 GHz
22 dBm
22 dBm
Antennas
(3) Dual-Band Antennas, 3 dBi each 
Wi-Fi Standards
802.11 a/b/g/n/ac
Wireless Security
WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting
Wall/Ceiling (Kits Included)
Operating Temperature
-10 to 70° C (14 to 158° F)
Operating Humidity
5 to 95% Noncondensing 
Certifications
CE, FCC, IC
* Included with the single-pack of the UAP-AC-PRO

UAP-AC-PRO
Dimensions	196.7 x196.7 x 35 mm (7.74 x 7.74 x 1.38')
Weight with Mounting Kit	350 g (12.35 oz) 450 g (15.87 oz)
Ping (itch) (jeremyfischer) mac os. Networking Interface	(2) 10/100/1000 Ethernet Ports
Buttons	Reset
Power Method	PoE 802.3af/802.3at
Power Supply	48V, 0.3A Gigabit PoE Adapter*
Max. Power Consumption	9W
Operating Frequency	2.4 GHz 5 GHz
Max. TX Power 2.4 GHz 5 GHz	22 dBm 22 dBm
Antennas	(3) Dual-Band Antennas, 3 dBi each
Wi-Fi Standards	802.11 a/b/g/n/ac
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting	Wall/Ceiling (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC